SVS SoundPath Tri-Band Wireless Audio Adapter

The SoundPath Tri-band Wireless Audio Adapter transmits a pristine LFE or full-range stereo audio signal up to 39 metres at 16-bit/48KHz with ultra-low latency. Tri-Band technology auto-switches between three wireless bands for use in crowded wireless signal areas where single-band wireless transmitters are prone to interference. Wirelessly connects subwoofers, powered speakers, and more.

SETUP

Setup of the SoundPath Tri-Band Wireless Audio Adapter takes minutes. Once installed, it auto-switches between the 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands for uninterrupted audio signal transfer. Impervious to interference from Bluetooth, Wi-Fi routers, wireless security systems, cameras, and other wireless devices.

PRODUCT OVERVIEW

Optimised for congested wireless environments, the SVS SoundPath Tri-Band Wireless Audio Adapter expands SVS’ range of full-range wireless audio adapters. In most systems, the more affordable SVS SoundPath Wireless Audio Adapter is sufficient, however, if you have a wireless environment prone to interference from other devices, the Tri-Band version is better suited for pristine signal transfer without interference.

The SVS SoundPath Tri-Band Wireless Audio Adaptor reduces cable clutter without sacrificing performance. Wirelessly connect a subwoofer, stereo zone of powered speakers, powered surround sound speakers, and other components in just minutes. Transmits a full-range (6Hz – 20 kHz) stereo signal up to 39 metres (line-of-sight).

By auto-switching between the 2.4 GHz, 5.2 GHz, and 5.8 GHz wireless bands, the adapter operates flawlessly in the most crowded wireless environments. Uncompromised sound quality, less cable clutter, and no more interference from security cameras, Bluetooth devices, smart TVs, WiFi mesh networks, or other wireless devices.

QUICK & EASY 3 MINUTE SETUP

The transmitter and receiver come pre-paired, and setup takes only minutes: - Connect the transmitter to an AV receiver, TV or other audio source via RCA - Connect the receiver to a subwoofer, powered speaker, power amplifier, or other line level devices - Make sure both the transmitter and receiver are receiving power (through included wall adapter or USB source) - Wait a few seconds for the adapters to sync and you’re ready - Up to three receivers can be paired to one transmitter to create a multi-room distributed audio system or for use with multiple powered subwoofers or speakers

FEATURES

• Dimensions: W 3.15" (80mm) x D 2.36" (60mm) x H 1.02 (26mm)
• Weight: 1.25 lbs
• Deters against against both in and out of band sources of interference, including: microwaves, wireless cameras, cordless phones, Bluetooth devices and more
• Operates seamlessly alongside 802.11b/g/n Wi-Fi
• Automatic receiver antenna diversity minimizes fading and multi-path effects
• Seamless RF band/channel switching
• RF Band – Tri-Band (auto switching) (2.4/5.2/5.8 GHz) – finds the best solution and connects
• Three RF frequency ranges for each frequency band:
  • Band 1: 2400-2483.5MHz
  • Band 2: 5150-5250MHz
  • Band 3: 5725-5875MHz

• 22 Mbps wireless air data rate
• Sample Rate: 48kHz
• THD+N: -70dB (10Hz – 20kHz)
• S/N: +105dB (10Hz - 20kHz)
• Cross-talk: >75dB @1KHz
• Frequency Response: 6Hz – 20 kHz +/- 0.5 dB
• Audio Latency: < 19ms
• Transmission Range 130’ (line of sight)